Renting? You can still charge at home. The Gemini flex gives you up to 11 kW without a fixed installation. At home, it hangs on the included wall bracket you fit yourself in a few minutes, and it lifts straight off again when you need it. Heading away for the weekend? Put it in the boot and charge from any CEE socket on your way.
Charges almost every EV and plug-in hybrid common in Europe
No electrician needed: plug into a CEE red 16 A socket
With the right adapter, it charges from a household or campsite socket too
At 1.63 kg, it fits in any car's boot
Access control via RFID chip or app, and the charging cable locks while charging
Works with tado° Smart Charging, so your car charges when electricity is cheapest
Pair it with tado° Smart Charging and the tado° HOURLY tariff, and your car automatically charges during the cheapest hours. You'll see exactly how much you charged, and what you paid for it, in the app.
go-e Charger Gemini flex: portable EV charger (11 kW)
629,00€
Price-performance winner 2023
Named price-performance winner 2023 by Auto Bild and P3, with a score of 1.3 in the wallbox test by Haus & Garten.
You decide how fast to charge
Generally, your car and the charger sort out the right charging power automatically. Want to slow things down? Turn the charging current down in the app or with the push button on the device. This is helpful when you want to charge on solar power alone.
Protected against unauthorised charging
Turn on access control, and charging starts only with an RFID chip or via the app. The charging cable locks as soon as the charging process starts. Even parked at the kerb, your charger is secured.
Built-in residual current protection
The DC protection module with DC detection and additional AC detection is already inside. The charger also runs a phase and voltage check and an earthing test. A separate residual current circuit breaker, at least type A, must be installed upstream.
Product Details and Tech. Specification:
Charging power and current
- Maximum charging power: 11 kW (16 A, 3-phase)
- Charging current: adjustable in 1 ampere steps between 6 A and 16 A
- Setting the charging power: via push button and app
- Rated voltage: 230-240 V (single-phase) / 400-415 V (three-phase)
Connection and portability
The charger comes with a 30 cm connection cable and a CEE red 16 A plug. For other sockets, adapters are available as accessories: CEE red 32 A (limited to 16 A by the charger), CEE blue 16 A (single-phase) and safety plug 16 A (household socket, single-phase). A household socket caps you at 2.3 kW.
Connectivity and interfaces
- Documented public API interfaces: HTTP, MQTT, Modbus TCP
- OCPP 1.6
- go-e grid operator API
- Ready for the requirements of §14a EnWG
Convenience features and app
The go-e app gives you an electricity meter (total kWh and total amount per RFID chip), RFID chip/card management, a scheduler, flexible electricity tariffs with intelligent charging management, kWh Limit Mode, Eco Mode and Daily Trip Mode.
The tado° app makes sure you save money on every charge: your car charges when market prices are low. It also gives you an overview of your consumption. Charging permissions, RFID chips and security settings stay in the go-e app.
Dimensions and weight
- Dimensions: approx. 15.5 x 26 x 11 cm
- Weight: approx. 1.63 kg
- Connection cable: 30 cm + plug, 5 x 2.5 mm² (type H07BQ-F)
What’s in the box
11 kW wallbox with 16 A CEE red plug
Wall bracket incl. screws and dowels
Optionally mountable anti-theft device (U-piece)
One reset card
One RFID chip (already taught-in)
Brief instructions
It's smart to charge at home
At home you pay your own electricity price, not whatever a charge point operator decides to charge you. Add a dynamic tariff and you're automatically charging during the cheapest hours of the day on its own. The app keeps the overview for you: how much, and at what price.
Flexible wherever you go
Holiday homes, friends' houses, campsites. Charge points are often rare in all of them. But sockets aren't! Keep the charger and an adapter in the boot, and you can charge wherever there's a suitable socket.
Charge with your own solar power
Around midday your PV system makes more electricity than the house can use. Connect the charger to a compatible energy management system, and your car takes that PV surplus. Enjoy a full battery, coming straight from your own roof.
Perfect fit for renters
A fixed installation means asking your landlord first. The Gemini flex just hangs in its bracket and lifts off without leaving a mark on the wall. When you move, it moves with you.
FAQ
Do I need an electrician to install it?
Not to get going. Fit the wall bracket, hang the charger, plug it into a suitable socket. The only job for an electrician is putting in a CEE red 16 A socket at your parking space, if there isn't one already.
Which charging cable do I need?
The charger has a Type 2 socket, so bring your own type 2 cable. Vehicles with type 1 can be charged with an adapter cable type 2 to type 1, available as an accessory. Either way, every EV and plug-in hybrid approved in Europe will charge.
Can I charge from a normal household socket?
Yes, with the safety plug 16 A adapter, though you're capped at 2.3 kW. Fast charging needs a CEE socket.
How fast will my car charge?
That depends on your car and your connection, which the charger works out with the vehicle automatically. If you'd rather charge slowly, turn the charging current down in the app or with the push button.
What if I move home?
You can simply take the wallbox with you. It’s mounted on a wall bracket and can be removed without leaving any marks. At your new parking space, you’ll just need a suitable socket again.
What do I get from the tado° app?
The app tracks market electricity prices as they change hour by hour, and starts charging when they're at their lowest. Your consumption shows up there too. You'll need a dynamic tariff for this, like tado° HOURLY.
5 stars: 1 (100%)
4 stars: 0 (0%)
3 stars: 0 (0%)
2 stars: 0 (0%)
1 star: 0 (0%)
H
Hannes
Cool optimierung
Kann mit meinem VW ID.3 sogar über 7 Tage optimieren, inkl. PV - Sehr cool
Shipping for your order is free within the EU for orders of €150.00 or more, and returns are also completely free for all standard products. For orders below €150.00, shipping costs are €4.99.
Please note, however: For orders containing the Midea PortaSplit, a shipping fee of €74.79 applies instead. In the event of a return of this item, you must either organize and carry out the return yourself at your own expense, or use our return service for a fee of €99.00 per return and item.
You can find out exactly which countries we deliver to here.
Choosing a selection results in a full page refresh.
Opens in a new window.
Anonymous
Leider benötige ich nur einen Thermostat aber mit
Leider benötige ich nur einen Thermostat aber mit dem bin ich sehr zufrieden.
Smart Radiator Thermostat X - Starter Kit
Nico Rockstroh
Tado Heizkörperventil
Hallo
Sehr gute Geräte schnelles einrichten 👍👍👍aber ein kleiner
Sache gibt es…….wen Internet ausfällt, kann man sie nur manuell steuern und das ist ein bisschen nervig.
Smart Radiator Thermostat X - Starter Kit
Suresh
Excellent programmer and themostat
It is very easy to install if you know your heating system. The app is nice and easy to programme the timings .copy and paste function is handy . Please keep in my mind.Some of the features in the app need a subscription.
Wireless Smart Thermostat X - Starter Kit incl. Programmer with Hot Water Control and OpenTherm
Ben
Makkelijke thermostaat
Had eerst nest van Google maar na beëindig is tado veel beter, aansluiten is makkelijk werkt echt voortreffelijk, heb zelfs nu de tado x2 thermostaat aangeschaft.
Wireless Smart Thermostat X - Starter Kit
Raoul.
Excellent product, and service!
I've installed two of these now.
The ability to conditionally program temperatures in your home while not present is so handy in a hot climate.
Melbourne Australia is a city where you still take your umbrella to work , evenwhen it's forecast to reach 40°c 8)))
Having the flexibility to adapt to Melbourne's weather feels like I'm cheating!
Shout out to Igor in support also.
The 2nd Tado did not parse heating thru to Apple Home app and Igor updated things once I provided the information and everything updated without me having to reset anything. <- good code all round.
Well done Tado and Igor, I'll be recommending your products to others here in Australia at every opportunity.